Pumps

Stainless Steel Submersible Pumps suitable for corrosive wastewater environments and drainage water containing sand and silt. Manufactured under the quality system ISO9001 and the IS14001 environment system and certified as UL, CE and GS approved.
iso

pumps1

Vortex 100 ( 8 m head)

pumps2

Drain 100 (12 m head)

pumps3

Capacity

The Vortex 100 is a stainless steel sewage pump with a capacity of 90 litres per minute at 8 metres of head.

The Drain 100 is a stainless steel drainage pump with a capacity of 75 litres per minute at 12 metres of head.

The motor case, pump body and impeller of the pumps are in stainless steel AISI 304. The motor shaft is stainless steel with a double mechanical seal of silicon carbide in the oil chamber with built in motor protection and a 10 metre power cable. Protection class is IP 68 with class F insulation. A mechanical float switch is supplied as standard. The outlet is 1.5" with two plastic pipe connections for 40 mm. and 50 mm. pipe connections.

Additional pump floats, non return valves, alarms, control panels and remote monitoring are also available.
 
1_distribution_boxesPumped Polishing Filters 

A Pressure distribution system is a more efficient method of distributing effluent Read More

2_distribution_BoxesDistribution Boxes

Tuf-Tite Distribution Boxes - the US industry standard, are now available in Europe through Ashtecs Read More

1.dripline

Drip distribution is the fastest growing method of distributing wastewater effluent to soils in the US Read More

3_tank_riserTank Risers & Lids

Rainwater harvesting tanks, secondary treatment tanks, pump tanks and septic tanks Read More

4_effluent_filterEffluent Filter Screens

Effluent filters are recognised as the best investment for protecting percolation areas Read More

UV Disinfection is highly efficient and eliminates 99.99% of germs and bacteria Read More